2022-03-21 16:08:20
Click:
If the beam bulb does not light up
First, first check whether the bulb is burned out, how to detect: simple method, put a good bulb on the test, if it is burned out of the bulb, replace it, if the bulb is still not bright, check the lighter, that is, the lighting board, consider changing the lighting board.
Second, if there is no reaction to the boot, check whether the power supply is burned, open the machine to see the power supply, use the master meter to check whether there is a voltage output. If it is burned, there is no voltage output. It is necessary to change the power supply, which is a core accessory that supplies electricity to the entire lamp.
Third, if the bulb is good or bad, or check the first change of the bulb, if the bulb is still good or bad, check whether the fan next to the light plate is broken. If the fan of the lighting board is broken, it will be a phenomenon that the bulb is good and bad, and the fan will be replaced.
Fourth, if the three problems still can't be checked, check that the lighting board has a 5V voltage power supply wire terminal, and use the universal meter to measure whether there is a 5V voltage arriving. If not, it is considered that it is a motherboard problem, and the motherboard should be replaced.